• Tank and collectors SS316
  • Piping in contact with the product: SS316
  • Base frame and other steel parts: SS304
  • Pump: 4 Kw
  • CIP return pump: 3 kW
  • Mechanical seal: Rotary part Silicon carbide (SiC), Stationary part Carbon (C), Gaskets EPDM
  • Electrical resistance: 18.5 kW
  • Tank insulation: Mineral wool



  • 300L tank for preparing the cleaning solution.
  • Electrical resistance heating with temperature regulation fitted in the tank.
  • Constant level in the tank using a pressure switch.
  • Pump.
  • Collectors with automatic butterfly valves with pneumatic actuator and C-TOP+ control unit. Base frame with wheels.
  • Stainless steel electric panel.
  • HMI and PLC
  • Tested and verified in our installations.
  • The pneumatic valves prevent errors during CIP operational phases such as rinsing with water, chemical product and its subsequent recovery, final rinsing.
  • Combining pneumatic valves with the PLC ensures control over each operational phase duration, an important parameter when ensuring a correct cleaning cycle.
  • Temperature control.
  • Options such as chemical product dosing and flow rate control enable the monitoring of two other important parameters that ensure a correct cleaning cycle: chemical concentration (which may differ depending on the chemical used) and the flow rate, which can vary based on the equipment being cleaned.
  • This system with some optional extras can control the 4 main parameters that ensure a correct cleaning cycle: temperature, time, flow rate, and chemical concentration.
  • SS304 300LTR tank for water recovery.
  • Pressure gauge at the pump outlet.
Reviews (0)


There are no reviews yet.

Be the first to review “CLEAN IN PLACE (CIP) SYSTEM”

Your email address will not be published. Required fields are marked *

Password Recovery

Lost your password? Please enter your username or email address. You will receive a link to create a new password via email.